Model IGAT-180 In-Ground, Automatic 180° Seat Turn
 Independent Operation        Vertical Seat Travel -- 42"  Can Be Padlocked
Automatic 180° Seat Turn     Installs in Deck Socket
Water Pressure Powered        Portable -- Lift Out and Roll Away
 Lifts ,400 lbs. at 55 psi       Flip-up Footrest Included      
  Our best-selling lift for most applications, the Model IGAT-180 is user-operable.
 The 180° turn allows the greatest access from the deck for the user and any assistants.
 Side-to-side transfers are easy -- the footrest flips up and the mounting arm is under the seat allowing unobstructed transfer. Seat rotates forward into pool, backwards exiting.
Standard seat has right arm only. Flip-up outer arm available. Pool edge sketch required
 




Model IGAT-90 In-Ground, Automatic 90° Seat Turn
   Independent Operation       Vertical Seat Travel -- 42"
 Automatic 90° Seat              Turn Installs in Deck Socket
 Water Pressure Powered       Portable -- Lift out and roll away
 Lifts 400 lbs. at 55 psi           Can be Padlocked in seat up position
For those who can do a diagonal or front pivot transfer, the Model IGAT-90 may be ideal
 Access for transfer is best with small or no gutter. Seat rotates backward into water,
 forward exiting. Standard seat has two arms. On both IGAT Models, mounting arm
 crossing deck is made to spec, so a sketch showing a dimensioned, cross-section vie
 of the pool deck, gutter, coping, and wall configuration is needed with each order.
 





Model IGMT In-Ground, Manual 360° Seat Turn ~
  Assisted Operation               Vertical Seat Travel -- 42" - _
 Manual 360° Seat Turn       Installs in Deck Socket __
 Water Pressure Powered       6"- 21" from pool edge ~
 Lifts 300 lbs. at 55 psi          Portable
 A good choice for pools with automatic covers and moveable floors, for in-ground spas
 with bench seats, and for pool/spa combinations, the Model IGMT has no parts in the
 water except when the seat descends. The 360° seat turn allows good access from any-
 where on the deck The front-facing seat (left photo) is the choice for in-ground spas an
 pool/spa combinations, while the side seat (right photo) is best for single in-ground pools.
 

Model IGRC In-Ground, Recessed Cylinder, Manual 360° Seat Turn
  Assisted Operation               Vertical Seat Travel -- 42"
 Manual 360° Turn                Installs in 6" PVC sleeve ~
 Water-Pressure Powered        Sunk30" below deck 1_
 Lifts 300 lbs. at 55 psi          Pool wall to sleeve center 8"-14" _
 The IGRC 1S used 1n the same pool/spa configurations as the IGMT _.
 and has a compact low profile (36" above deck in down position) with
 cylinder recessed into 6" PVC sleeve in deck. Can be built into wood deck or raised wall.